Range:
0.1 – 20 mg/L (clean water)
0 – 1000 mg/L (effluent, waste water…)
Power Supply:
100-240V 50/60 Hz 60 W+ internal battery 12 V
Outputs :
4-20 mA isolated, 12 bits resolution High threshold/low threshold relay Alarm default relay
Enclosure :
Watertight IP66 Painted steel box
Communication:
RS232 or RS485 (on demand) for PC, or MODBUS
Water flow rate :
typical 0.6 L/mn
Measurement cell volume :
50 mL
Sample temperature :
>3 to 40°C (in all the cases the temperature of measured water must be lower than that of the air surrounding the analyzer).
Sample pressure :
No pressure if sampling pump
0.1 to 1 bar without sampling pump